뇌졸중에 대한 기계적 혈전제거술 시 동맥 직경에 따른 흡인 카테터의 최적 크기

Jun 27, 2024 메시지를 남겨주세요

기계적 혈전제거술은 직접 흡인, 스텐트 회수 또는 이 둘의 조합을 포함하는 급성 허혈성 뇌졸중 치료에 효과적인 방법입니다. 폐색된 혈관의 직경에 따라 다양한 크기의 다양한 카테터를 사용하여 직접 흡인을 수행할 수 있습니다.

 

Some scholars have divided the angiographic results into three types: "complete recanalization", "partial recanalization" (in the case of thrombus migration downstream of the branch or distal thrombus in the area supplied by the recanalized arterial segment) and "no recanalization". At the same time, the arterial diameter was measured independently before surgery, and the inner diameter of the distal end of the aspiration catheter (DAC) was collected. The inner diameter of the catheter was divided by the arterial diameter (AD) . Through testing and research, it was found that the ratio of the inner diameter of the catheter to the inner diameter of the artery was significantly different between the three recanalization categories, among which the "complete recanalization group" had the highest ratio and the "no recanalization" group had the lowest ratio. Therefore, it was confirmed that the larger diameter of the aspiration catheter relative to the arterial diameter was associated with an increase in the success of recanalization. At the same time, it was reported that larger aspiration catheters had better recanalization effects than smaller catheters, especially catheters with a diameter of >MCA에서는 {{0}}.040인치이고 ICA에서는 0.064인치입니다. 카테터 크기와 재관통 성공률 사이의 관계는 흡인 카테터가 혈전을 포착할 때 더 큰 직경의 카테터가 더 큰 흡입력을 갖기 때문에 혈전이 흡인되지 않고 탈출할 가능성이 줄어들기 때문일 수 있습니다.

 

환자의 혈관과 카테터의 직경은 크게 다르지 않기 때문에 실제로 달성하기 어려울 수 있으며 다양한 크기의 흡인 카테터가 필요합니다. 다음은 학자들이 제시하는 다양한 옵션입니다. 원위 흡인 카테터의 최적 직경은 내경 {{0}}.7–0.8과 외경 0.8–1.0의 비율에 따라 계산됩니다. , 표시된 결과는 다양한 혈관 직경에 대한 것입니다.

 

info-645-572

 

요약하면, 흡인 카테터의 내경과 혈관 조영술로 측정한 동맥 직경의 비율은 0.7-0.8 범위에서 완전한 재관통과 가장 관련이 있습니다. 외과 의사는 재관통 성공률을 높이기 위해 지침에 따라 보다 적절한 흡인 카테터를 선택할 수 있습니다.

문의 보내기

whatsapp

skype

이메일

문의